PPX Range - Technical Specifications
| Common Specifications | |||||
| Input Signal : | Variable 0 to +14dBu, i.e. 0. 775 to 4V RMS | ||||
| Input Impedance : | 20K Ohm unbalanced | ||||
| 40K Ohm balanced | |||||
| Input Connection : | XLR to BS5428 or Screw Terminal Option | ||||
| XLR Wiring : | To BS5428/IEC268 (Pin 2 hot) (European) | ||||
| Output Connection : | Speakon or Terminal/Binding Post Option | ||||
| Speakon Wiring : | +1 & +2 Positive, -1 & -2 Negative | ||||
| Load Impedance : | Stereo: 16, 8, 4 and 2 Ohm | ||||
| Bridge: 32, 16, 8 and 4 Ohm | |||||
| Bridge Mode : | Channel A driven in-phase (+Output) | ||||
| Channel B driven out of phase (-Output) | |||||
| Frequency Response : | 10Hz to 60KHZ (-1dB) @ 1 Watt 8 Ohm | ||||
| Signal To Noise Ratio : | >100dB (20Hz to 20KHZ) ref. Max Output | ||||
| Phase Angle : | >75° for 4 Ohm Load | ||||
| THD+Noise @ 0dB output 8 Ohms : | Typically 0.005% @ 1kHz | ||||
| Less than 0.015% 10Hz to 10kHz | |||||
|
Power Ratings in Watts RMS
|
PPX600 | PPX1300 | PPX2000 | PPX2400 | |
| Single Channel 1KHz : | 16 Ohms | 80 | 150 | 210 | 245 |
| 8 Ohms | 170 | 300 | 420 | 490 | |
| 4 Ohms | 275 | 500 | 730 | 860 | |
| 2 Ohms | 360 | 650 | 1000 | 1200 | |
| Dual Channel 1KHz : | 16 Ohms | 80 | 150 | 200 | 300 |
| 8 Ohms | 150 | 285 | 400 | 465 | |
| 4 Ohms | 235 | 450 | 680 | 800 | |
| 2 Ohms | 300 | 610 | 985 | 1200 | |
| Stereo Program* : | 16 Ohms | 80 | 160 | 210 | 245 |
| 8 Ohms | 175 | 320 | 420 | 500 | |
| 4 Ohms | 275 | 480 | 780 | 950 | |
| 2 Ohms | 360 | 720 | 1150 | 1350 | |
| LF Burst** : | 16 Ohms | 80 | 160 | 230 | 250 |
| 8 Ohms | 175 | 320 | 470 | 550 | |
| 4 Ohms | 300 | 530 | 840 | 1000 | |
| 2 Ohms | 435 | 750 | 1400 | 1700 | |
| Bridged Program : | 16 Ohms | 350 | 600 | 800 | 1000 |
| 8 Ohms | 550 | 950 | 1500 | 1900 | |
| 4 Ohms | 720 | 1400 | 2200 | 2700 | |
| Bridged 1KHz : | 16 Ohms | 300 | 600 | 800 | 900 |
| 8 Ohms | 470 | 900 | 1350 | 1600 | |
| 4 Ohms | 300 | 1200 | 1850 | 2200 | |
| Voltage Gain for full power @ 8 Ohms : | 31.5dB | 33.75dB | 37.5dB | 38dB | |
| Damping Factor ref. 8 Ohm, 100Hz : | >325 | >350 | 850 | 850 | |
| Power Bandwidth –1dB 1KHz 8 Ohm : | 12Hz - 48KHz | 10Hz - 40KHz | 13Hz - 38KHz | 13Hz - 38KHz | |
| Slew Rate : | 29V/µS | 33V/µS | 36V/µS | 36V/µS | |
| Rise Time 10KHz Sq. wave 10% - 90% : | <2.5µS | <3.4µS | 5µS | <5µS | |
| Power Requirements : | 1100VA | 2300VA | 3000VA | 3500VA | |
|
Physical Specifications
|
|||||
| Weight : | Net : | 19Kg | 23.5Kg | 27.5Kg | 28Kg |
| Gross : | 21.5Kg | 26Kg | 30Kg | 30.5Kg | |
| Dimensions : | The Product : | Width : | 482.6mm | ||
| Height : | 133mm | ||||
| Depth : | 450mm | ||||
| The Packing : | Width : | 630mm | |||
| Height : | 260mm | ||||
| Depth : | 570mm | ||||
| Volume : | 0.093366M3 | ||||
|
Notes :
|
*Stereo Program Power is the equivalent RMS power with 20Hz-20kHz Pink Noise. | ||||
| **LF Power Burst is the equivalent RMS power during a 20mS Sinewave @ 250Hz | |||||